Is the OLED MacBook Pro Harder to Fix Than the Neo...?

Can Apple make a laptop more repairable than the MacBook Neo? I want to see whether the OLED MacBook Pro can beat it where it matters: getting inside and replacing parts.

Fewer Screws, Plenty of Clips

I start underneath. The Pro has fewer screws than the Neo, which sounds promising. Then come the clips. There are plenty of those holding the bottom cover in place.

Getting the cover off is only the beginning. Once I can see the battery, the comparison gets less encouraging.

The Battery Changes the Mood

Apple uses adhesive on the Pro’s battery, instead of the screwed-down arrangement in the Neo. I would much rather be reaching for a screwdriver than dealing with battery adhesive.

Then there is the logic board. Looking inside, it seems to be in the way of almost everything I want to reach. Even parts such as the fans and USB-C ports require removing the board first.

Find all the tools we use here: Tools Page

The Glowing Logo Has a Catch

What if that glowing Apple logo needs fixing? iFixit tried getting inside the lid, and the OLED panel broke during the attempt. Reaching the light behind the display turned into a much bigger job.

There is one encouraging finding: in iFixit’s board-swap test, Touch ID calibrated successfully with the existing sensor and a donor logic board. It still worked after they put the original board back.

That is progress I want to see more of. Getting a part out only helps if it will work again afterward.

Final Thoughts

I want the repair-friendly ideas in the Neo to move up the lineup, too. A more expensive laptop should not make the basics harder. Would you trade a little of that sleek design for a battery and ports that are easier to replace?

See you in the next article!

Next
Next

Would You Buy One Folding iPhone or Two Devices...?